QUALITY PAINTS & CUSTOM FINISHES FROM ROB SCOTT ENTERPRISES INC.

		520 Speedwell Avenue · Suite 101 Morris Plains, NJ 07950 Phone: 973-359-8664 Toll Free: 800-221-6545 Fax: 973-359-8642
^{RUST CONTROL}

Chemical Rust Converter

Here's how it works for you!

Can be applied to any rusted ferrous metal surface
With its unique properties, completely neutralizes surface rust immediately as it is being applied and continues to penetrate into affected areas, chemically converting and transforming rust into a hard black organic layer
With its elegant black matte finish, is an ideal finishing paint to cover any surface decrepancies during or after manufacture
Gives you cost effective corrosion control due to its very long-term protection qualities, thereby greatly reducing the need for routine maintenance work, i.e., marine environments, all types of road vehicles, buildings, bridges, road signs, lamp posts, railings, gates, pylons, cranes, swimming pools, reservoirs, water and oil storage tanks, piping and trunking, outside racking, routine maintenance and children's playgrounds
Does NOT contain Phosphoric acid or lead and is NON-TOXIC
Can be applied to DRY or DAMP surfaces
Only minimum surface preparations required degrease, wire brush or sandpaper loose particles. Wash off salt or chemicals
Can be easily applied by brush, spray, roller or dipping (brushing recommended for ultimate result)
Acts as a primer on rusted ferrous surfaces and can be left indefinitely in this primed state. It can also be coated with most types of paint
No washing down after application
Dries in 15-30 minutes to a black organic layer that has been chemically converted from the rusted surface